BFT P125020 BBT Battery Kit for Actuators - Instruction Manual

1. Destpêk

This instruction manual provides essential information for the safe and efficient installation, operation, and maintenance of the BFT P125020 BBT Battery Kit. This kit is designed to provide backup power to compatible BFT gate or door actuators, ensuring continued operation during power outages. Please read this manual thoroughly before proceeding with installation or use. Keep this manual for future reference.

2. Agahiyên Ewlekariyê

GAZÎ: Neşopandina van rêwerzên ewlehiyê dikare bibe sedema şoka elektrîkê, agir, birîndarbûna giran an mirinê.

• Sazkirin divê ji hêla karmendên pispor ve li gorî kod û rêziknameyên elektrîkê yên herêmî were kirin.
• Disconnect main power to the actuator before installing or servicing the battery kit.
• Do not expose the battery kit to moisture, rain, or extreme temperatures.
• Ensure proper ventilation around the battery kit.
• Termînalên bataryayê kurt nekin.
• Pîlên kevin li gorî rêziknameyên jîngehê yên herêmî bavêjin.
• Use only genuine BFT replacement parts and accessories.

3. Naveroka pakêtê

Berî destpêkirina sazkirinê, piştrast bikin ku hemî pêkhate li wir in û bê zirar in.

• BFT P125020 BBT Battery Kit (main unit)
• Connection cables (if applicable, check packaging)
• Amûrên montajê (eger hebe, pakêtê kontrol bikin)

Note: Specific contents may vary slightly. Refer to your product packaging for an exact list.

4. Sazkirin û Sazkirin

This section outlines the general steps for installing the BFT P125020 BBT Battery Kit. Always refer to the specific wiring diagrams provided with your BFT actuator control unit for precise connection details.

4.1 Amûrên Pêdivî ye

• Screwdrivers (Phillips and Flathead)
• Tel strippers / cutters
• Multimeter (for verification)
• Drill (if mounting)

4.2 Gavên Sazkirinê

1. Veqetandina hêzê: Ensure the main power supply to the BFT actuator control unit is completely disconnected and locked out. Verify with a multimeter.
2. Çêkirin (Bijarte): If the battery kit requires mounting, select a suitable location near the actuator control unit, ensuring it is protected from weather and has adequate ventilation. Secure the kit using appropriate mounting hardware.
3. Connect to Control Unit: Locate the dedicated battery connection terminals on your BFT actuator control unit. These are typically labeled for battery input.
4. Têkiliyên Têl: Connect the positive (+) terminal of the battery kit to the positive (+) battery input terminal on the control unit. Connect the negative (-) terminal of the battery kit to the negative (-) battery input terminal on the control unit. Ensure all connections are secure and correctly polarized.
5. Têlkirina Ewle: Route and secure all wiring to prevent accidental disconnection or damage.
6. Xerca destpêkê: Once connected, restore main power to the actuator control unit. The battery kit will begin charging automatically. Allow sufficient time for the initial charge before relying on battery backup.

jimar 1: BFT P125020 BBT Battery Kit. This image shows the compact design of the battery kit, which provides essential backup power for BFT gate and door actuators.

5. Telîmatên Operating

The BFT P125020 BBT Battery Kit operates automatically once correctly installed and connected to a compatible BFT actuator control unit.

• Barkirina Otomatîk: When main power is supplied to the actuator control unit, the battery kit will automatically charge its internal batteries.
• Piştgiriya Hêzê: In the event of a main power failure, the battery kit will seamlessly provide power to the actuator, allowing for continued operation for a limited number of cycles, depending on the battery charge level and actuator usage.
• Nîşana Pîlê Kêm: Some BFT control units may provide an indication of low battery status. Refer to your actuator's control unit manual for specific details.

6. Maintenance

Regular maintenance helps ensure the longevity and reliable operation of your BFT P125020 BBT Battery Kit.

• Kontrola dîtbar: Periodically inspect the battery kit and its connections for any signs of damage, corrosion, or loose wiring.
• Paqijî: Keep the battery kit clean and free from dust and debris. Use a dry, soft cloth for cleaning. Do not use abrasive cleaners or solvents.
• Guhertina Pîl: Batteries have a limited lifespan. If the battery kit no longer provides adequate backup power, the internal batteries may need replacement. Contact BFT support or a qualified technician for battery replacement.
• Şertên Jîngehê: Ensure the battery kit remains within its specified operating temperature range and is protected from direct sunlight and moisture.

7. Destpêkirin

If you experience issues with your BFT P125020 BBT Battery Kit, refer to the following common problems and solutions.

For issues not covered here, or if troubleshooting steps do not resolve the problem, contact BFT technical support.

8. Specifications

Nîşe: Taybetmendî bêyî agahdarkirinê têne guhertin.

9. Agahdariya Garantiyê

BFT products are covered by a manufacturer's warranty against defects in materials and workmanship. The duration and terms of the warranty may vary by region and product. Please retain your proof of purchase. For detailed warranty information, refer to the official BFT website or contact your local BFT distributor.

This warranty does not cover damage caused by improper installation, misuse, neglect, unauthorized repairs, or acts of nature.

10. Piştgirî

For technical assistance, spare parts, or further information regarding the BFT P125020 BBT Battery Kit, please contact BFT customer support or your authorized BFT dealer.

• BFT Official Webmalper: www.bft-automation.com
• Belavkarê Herêmî: Refer to the BFT website for a list of authorized distributors in your area.

When contacting support, please have your product model number (P125020) and proof of purchase readily available.