Philips Lighting ER55LD3WR

Philips Lighting ER55LD3WR LED Nîşana Derketinê Rêbernameya Bikarhêner

Model: ER55LD3WR

Pêşkêş

This manual provides essential information for the safe and efficient use of your Philips Lighting ER55LD3WR LED Exit Sign. Please read these instructions carefully before installation and operation, and retain them for future reference. This product is designed for commercial lighting applications, specifically as a lighted exit sign.

Agahiyên Ewlekariyê

  • Always disconnect power before installing or servicing the unit.
  • Sazkirin divê ji hêla elektrîkçîyekî pispor ve li gorî rêziknameyên elektrîkê yên neteweyî û herêmî were kirin.
  • Vê hilberê ji bo mebestên ji bilî karanîna wê bikar neynin.
  • Piştrast bikin ku hemî girêdan ewle û bi rêkûpêk vegirtî ne.
  • Ji av û şimaya zêde dûr bimînin.

Naveroka pakêtê

Berî destpêkirina sazkirinê, piştrast bikin ku hemî pêkhate li wir in:

  • Philips Lighting ER55LD3WR LED Exit Sign unit
  • Amûra sazkirinê (pişk, lenger)
  • Destûra Rêvekirinê (ev belge)

Sazkirin û Sazkirin

The Philips Lighting ER55LD3WR LED Exit Sign is designed for wall mounting. Ensure the mounting surface is suitable to support the weight of the unit.

  1. Qada Sazkirinê amade bikin: Disconnect power to the circuit where the exit sign will be installed.
  2. Çêkirin:
    • Identify the desired wall mounting location.
    • Use the provided mounting hardware to securely attach the exit sign to the wall. Ensure the unit is level.
  3. Têlkirin:
    • Connect the building's 120V AC power supply to the corresponding wires on the exit sign. Refer to the wiring diagram inside the unit's housing for specific connections.
    • Zemînek rast piştrast bikin.
    • Connect the internal battery (if not pre-connected). This is crucial for emergency operation.
  4. Civîna Dawî: Secure any covers or diffusers.
Philips Lighting ER55LD3WR LED Exit Sign, front view

Wêne 1: Pêşî view of the Philips Lighting ER55LD3WR LED Exit Sign. This image shows the white housing with the red "EXIT" lettering illuminated, indicating its primary function as an emergency egress indicator.

Telîmatên Operating

Once installed and power is restored, the Philips Lighting ER55LD3WR LED Exit Sign will operate automatically.

  • Operasyona Normal: When AC power is present, the "EXIT" sign will be illuminated by the internal LEDs. The green indicator light on the unit will be ON, signifying operating status.
  • Operasyona Acil: In the event of an AC power failure, the unit will automatically switch to battery backup, illuminating the "EXIT" sign for a specified duration (typically 90 minutes).
  • Bişkojka Testê: A test button is provided on the unit to verify emergency operation. Press and hold the "Push to Test" button to simulate an AC power failure. The sign should remain illuminated, and the green indicator light will blink, indicating testing. Release the button to return to normal operation.
Philips Lighting ER55LD3WR LED Exit Sign, test button and indicator lights

Wêne 2: Ji nêzîk ve view of the test button and indicator lights on the Philips Lighting ER55LD3WR LED Exit Sign. The green indicator shows operating status (ON for ready, Blinking for testing). The red indicator shows service alerts such as battery, charger board, transformer, or LED strip faults.

Lênerrînî

Regular maintenance ensures the reliability and longevity of your LED Exit Sign.

  • Testa Mehane: Press the "Push to Test" button for at least 30 seconds to ensure the battery backup system is functioning. The sign should remain illuminated.
  • Annual Test: Disconnect AC power to the unit for 90 minutes to verify the battery can sustain emergency illumination for the required duration.
  • Paqijî: Derveyê yekîneyê bi nermî paqij bikin, damp çît. Paqijkerên abrasive an solvanan bikar neynin.
  • Guhertina Pîl: The internal battery has a limited lifespan. If the unit fails to hold a charge or the red "Battery fault" indicator illuminates, the battery may need replacement. Contact qualified service personnel for battery replacement.

Çareserkirina pirsgirêkan

Ji bo pirsgirêkên hevpar û çareseriyên wan li tabloya jêrîn binêrin.

PirsegirêkSedema gengazÇare
Sign does not illuminate (AC power present)No AC power; faulty wiring; LED strip faultCheck circuit breaker; verify wiring connections; contact service for LED replacement.
Sign does not illuminate during power outage (emergency mode)Battery not connected; discharged battery; faulty battery; charger board faultEnsure battery is connected; allow 24 hours for initial charge; replace battery; contact service for charger board repair.
Red Service Alert indicator is ONIndicates battery, charger board, transformer, or LED strip fault (refer to unit label)Identify specific fault from unit label; perform monthly/annual tests; contact qualified service personnel.
Green Operating Status indicator is OFF (AC power present)No AC power; internal faultCheck AC power supply; contact qualified service personnel.

Specifications

TaybetîHûrî
Hejmara ModelER55LD3WR
NîşanPhilips Ronahî
Tîpa Çavkaniya RonahîLED
Voltage120 Volt
Çavkaniya HêzêCorded Electric
Mounting TypeÇiyayê dîwar
MalHesinî
RengSpî
Mezinahiya Hilberê4.25 x 6.25 x 4.8 inches
Babetê Weight4.98 lîre
UPC781370410117

Garantî û Piştgirî

For warranty information or technical support, please contact Philips Lighting customer service. Keep your purchase receipt as proof of purchase.

Çêker: Philips Ronahî

Webmalper: Serdana Dikana PHILIPS li ser Amazonê bikin

© 2023 Philips Lighting. Hemû maf parastî ne.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.