ET2 Harmony E24506-91PC LED Pendant Light Instruction Manual

1. Destpêk û Serview

This manual provides detailed instructions for the safe installation, operation, and maintenance of your ET2 Harmony E24506-91PC LED Pendant Light. Please read all instructions carefully before beginning installation and retain this manual for future reference.

The ET2 Harmony pendant light features multiple bubble glass balls, each illuminated by an integrated LED. The individual pendants are suspended by adjustable cables, allowing for customization of the fixture's overall design and drop height. The fixture is designed for indoor use and is fully dimmable.

Image 1.1: The ET2 Harmony E24506-91PC LED Pendant Light, showcasing its design with multiple bubble glass spheres.

2. Agahiyên Ewlekariyê

WARNING: RISK OF ELECTRIC SHOCK. Ensure power is turned off at the circuit breaker or fuse box before installation, servicing, or changing any components. Consult a qualified electrician if you are unsure about the installation process.

• Pêdivî ye ku ev hilber li gorî koda sazkirinê ya guncan ji hêla kesek ku bi çêkirin û xebitandina hilberê û xetereyên têkildar re nas dike were saz kirin.
• Use only UL Listed wire connectors.
• Ji cildê diyarkirî derbas neketage (120 Volt).
• Bi tu awayî amûrê birêkûpêk nekin.
• Keep combustible materials away from the light fixture.
• Di dema sazkirinê de lepikên ewlehiyê û çavikên ewlehiyê li xwe bikin.

3. Naveroka pakêtê

Carefully unpack the fixture and check that all components are present and undamaged. Retain all packaging materials until installation is complete.

• Pendant Light Fixture (Canopy with integrated LED pendants)
• Mounting Hardware (Mounting plate, screws, wire nuts)
• Rêbernameya Rêbernameyê (Ev belge)

4. Sazkirin û Sazkirin

Sazkirin divê ji hêla elektrîkçîyekî pispor an kesekî/ê xwedî tecrubeya di sazkirina elektrîkê de were kirin.

4.1 Amûrên Pêwîst (Ne Tê de ne)

• Screwriver serê Phillips
• Screwdriver Flathead
• Striberkerên têlê
• Tape elektrîkê
• Serok

4.2 Gavên Sazkirinê

1. Hêzê Vekin: Locate the circuit breaker or fuse box controlling the power to the installation location and turn off the power. Verify power is off using a voltage tester.
2. Rûyê Mountkirinê amade bikin: Ensure the junction box is securely mounted and capable of supporting the fixture's weight (approximately 11.07 pounds).
3. Peldanka Mountkirinê girêdin: Secure the fixture's mounting plate to the junction box using the provided screws.
4. Têkiliyên Elektrîkê çêbikin:
   • Connect the bare copper or green ground wire from the fixture to the ground wire from the junction box using a wire nut.
   • Bi karanîna gwîzekê têlê, têla spî (bêalî) ji amûrê bi têla spî (bêalî) a ji qutiya girêdanê ve girêbide.
   • Bi karanîna gwîzekê têlê, têla reş (germ) ji amûrê bi têla reş (germ) a ji qutiya girêdanê ve girêbide.
   • Ensure all connections are secure and insulated with electrical tape if necessary.
5. Secure Fixture Canopy: Carefully push the wired connections into the junction box. Align the fixture canopy with the mounting plate and secure it using the provided screws.
6. Adjust Pendant Lengths: The individual pendant cables are adjustable. To adjust, gently push the cable into the canopy's cable grip and pull to the desired length. Ensure all pendants are securely set before proceeding.
7. Install Glass Balls: The bubble glass balls are pre-installed with LED bulbs. Ensure they are securely attached to their respective pendant cables.
8. Vejandina Hêzê: Dema ku sazkirin qediya û hemî girêdan ewle bûn, elektrîkê li ser şkênera devreyê vegerînin.

Image 4.1: Dimensional drawing of the ET2 Harmony E24506-91PC, indicating a 12.75-inch width and a maximum overall height of 126 inches.

Image 4.2: Detail of the fixture's polished chrome canopy and the attachment points for the adjustable pendant cables.

5. Telîmatên Operating

The ET2 Harmony E24506-91PC LED Pendant Light is designed for simple operation.

• Power On / Off: Control the light using a standard wall switch connected to the fixture's circuit.
• Fonksiyona Dimming: This fixture is fully dimmable. For optimal performance, use with a compatible LED dimmer switch. Consult your electrician for dimmer compatibility.

6. Maintenance

Parastina birêkûpêk dê ji bo parastina xuyang û fonksiyona ronahiya pendantê ya we bibe alîkar.

• Paqijî: Turn off power before cleaning. Use a soft, dry, or slightly damp cloth to wipe the polished chrome finish and glass spheres. Do not use abrasive cleaners, solvents, or polishes as they may damage the finish.
• Veguheztina LED: The integrated LED bulbs are designed for long life. If replacement is ever needed, contact ET2 customer support for guidance on obtaining compatible replacement parts. Do not attempt to replace LEDs with standard bulbs.

7. Destpêkirin

If you experience issues with your pendant light, refer to the following troubleshooting guide:

If the problem persists after attempting these solutions, contact ET2 customer support.

8. Specifications

9. Garantî û Piştgirî

9.1 Agahî Garantî

This ET2 Harmony E24506-91PC LED Pendant Light is covered by a Garantiya sînorkirî ya 1-salî ya hilberîner ji roja kirînê ve. Ev garantî kêmasiyên materyal û karîgeriyê di bin karanîna normal de vedihewîne. Ew zirara ku ji sazkirina nerast, qezayê, karanîna xelet, îstismar, an guhertinên bêdestûr çêdibe nagire nav xwe.

9.2 Piştgiriya Mişterî

For technical assistance, warranty claims, or to order replacement parts, please contact ET2 customer support. Have your model number (E24506-91PC) and proof of purchase ready when contacting support.

You can find contact information for ET2 by visiting their official webmalper an firotgeha ku hilber lê hatî kirîn.