Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Serî Manual Bikarhêner

1. Destpêk

The Hotone Nano Legacy British Invasion is a compact 5-watt guitar amplifier head designed to deliver classic British amplifier tones. This manual provides essential information for the safe and effective use of your amplifier. Please read it thoroughly before operation.

Taybetmendiyên sereke:

Ultra-compact, portable ampserê lifier.
Inspired by the legendary Vox AC30 amplifier tone.
Separate Volume and Gain control knobs.
EQ ya 3-band (Bass, Middle, Treble) ji bo şekildana tonê.
Integrated FX Loop for external effects integration.

2. Telîmatên Ewlekariyê

Navê min: Use only the specified 18V DC power adapter (center negative). Incorrect voltage dikare zirarê bide yekîneyê.
Perwanekirin: Hewakirina têr peyda bike. Deriyên hewakirinê negirin.
Şilî: Amûrê ji avê an jî şilbûna zêde dûr bigirin.
Germa: Ji danîna cîhazê nêzîkî çavkaniyên germê an jî di bin tîrêjên rasterast ên rojê de dûr bisekinin.
Paqijî: Tenê bi qumaşê hişk paqij bikin.
Xizmetkirin: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.

3. Hilbera Serîview

Hotone Nano Legacy British Invasion Amplifier Serî

Wêne: The Hotone Nano Legacy British Invasion 5-Watt Compact Guitar Amp Head, showcasing its compact size and overall design.

Kontrolên Panela Pêşî:

Hotone Nano Legacy British Invasion Front Panel Diagram

Wêne: Front panel of the Hotone Nano Legacy British Invasion amplifier head, showing input jack, EQ knobs (Bass, Middle, Treble), Gain, Volume, and Power switch. Each control is numbered and labeled for easy identification.

BEYAN: 1/4" mono jack for connecting your guitar.
BASS: Controls the low frequency response of your tone.
NAVÎN: Controls the mid frequency response of your tone.
SESBIK: Controls the high frequency response of your tone.
QEZENC: Controls the pre-amp gain level, affecting distortion and sustain.
BEND: Hêjmara hilberîna giştî ya dengdanê kontrol dike ampzindîtir.
Veguheztina ON/OFF: Hêza yekîneyê vedike an vedike.

Têkiliyên Panela Paşîn:

Hotone Nano Legacy British Invasion Rear Panel Diagram

Wêne: Rear panel of the Hotone Nano Legacy British Invasion amplifier head, showing power input, Phones/Line Output, AUX In, FX Loop Send/Return, and Speaker Output. Each connection point is numbered and labeled.

18V DC: Power input for the included 18V DC adapter (center negative).
TELEFON/XET DERKETIN: 1/8" stereo jack for headphones or direct recording.
AUX IN: 1/8" stereo jack for connecting an external audio player (e.g., smartphone, MP3 player) to play along with.
VEGERA FX LOOP: 1/4" mono jack to connect the output of your effects pedal to the amplifier's power section.
DERKETINA AXAFTARÊ: 1/4" mono jack for connecting to a speaker cabinet (4-16Ω impedance).
FX LOOP SEND: 1/4" mono jack to send the pre-amp signal to your effects pedal's input.

4. Setup û Girêdanên

Têkiliya Hêzê: Connect the supplied 18V DC power adapter to the "18V DC" input on the rear panel. Plug the adapter into a suitable power outlet.
Girêdana Gitarê: Plug your guitar into the "INPUT" jack on the front panel using a standard 1/4" instrument cable.
Têkiliya Axaftvan: Connect the "SPEAKER OUTPUT" on the rear panel to your speaker cabinet using a speaker cable. Ensure your speaker cabinet has an impedance between 4 and 16 ohms. Gazî: Operasyonê nekin amplifier without a speaker connected to the SPEAKER OUTPUT, as this can damage the unit.
Headphones/Line Out (Optional): For silent practice or direct recording, connect headphones or a recording interface to the "PHONES/LINE OUTPUT" jack. This will mute the speaker output.
Têketina AUX (Vebijarkî): To play along with backing tracks, connect your external audio device (e.g., smartphone, MP3 player) to the "AUX IN" jack using a 1/8" stereo cable.
FX Loop (Optional): To integrate external effects pedals, connect the "FX LOOP SEND" to the input of your effects pedal and the output of your effects pedal to the "FX LOOP RETURN".

5. Telîmatên Operating

Hêzdarkirin: Ensure all connections are secure, then flip the "ON/OFF" switch to the ON position. The power indicator light will illuminate.
Mîhengên destpêkê: Start with the "VOLUME" and "GAIN" knobs set to their minimum positions (fully counter-clockwise). Set the "BASS", "MIDDLE", and "TREBLE" knobs to the 12 o'clock position (neutral).
Rêzkirina qezencê: Slowly increase the "GAIN" knob to achieve your desired level of overdrive or distortion. Higher gain settings will produce more saturated tones.
Serastkirina Volume: Once your gain is set, slowly increase the "VOLUME" knob to reach your desired listening level.
Tone Shaping with EQ:
- BASS: Adjust for low-end warmth and fullness.
- NAVÎN: Adjust for presence and cut in the mix. Lowering mids can create a "scooped" sound, while boosting them can make your guitar stand out.
- SESBIK: Adjust for brightness and clarity.
Hêzdarkirin: Before disconnecting any cables or the power supply, turn the "VOLUME" knob down and then flip the "ON/OFF" switch to the OFF position.

6. Maintenance

Paqijî: Ji bo paqijkirina derveyê qumaşê nerm û hişk bikar bînin amplifier. Do not use liquid cleaners, aerosols, or solvents.
Embarkirinî: Depo bikin ampLi cîhek sar û zuwa, dûr ji tîrêjên rojê yên rasterast û germahiyên zêde hilînin.
Neqlîye: When transporting, ensure the amplifier is securely packed to prevent physical damage.
Lênêrîna Kabloyê: Regularly check all cables for signs of wear or damage. Replace faulty cables immediately.

7. Destpêkirin

Pirsegirêk	Sedema gengaz	Çare
Deng dernakeve	Elektrîk nehatiye girêdan an jî vêketî nîne. Guitar cable faulty or not fully inserted. Speaker cable faulty or not fully inserted. Nelihevhatina împedansa axaftvan. Volume/Gain knobs set to minimum. Headphones connected to PHONES/LINE OUT.	Check power connection and ON/OFF switch. Ensure guitar cable is secure and functional. Ensure speaker cable is secure and functional. Verify speaker impedance is 4-16Ω. Increase Volume and Gain. Disconnect headphones if using speaker output.
Gurîn an dengekî zêde	Faulty power supply or ground loop. Mîhengên qezenca bilind. Destwerdana ji cîhazên din ên elektronîkî. Single-coil pickups (inherently more susceptible to hum).	Try a different power outlet or a high-quality isolated power supply. Reduce gain settings. Barkirin amprakirina ji elektronîkên din dûr bixin. Consider using humbucker pickups or a noise gate pedal.
Dengê qels an jî xirabkirî	kabloyên xelet. Incorrect speaker connection. Axêverê zirar dîtiye. Sînyala têketinê pir germ e.	Check and replace cables if necessary. Ensure speaker cable is correctly connected and speaker impedance is correct. Test with a different speaker if possible. Reduce output from guitar or preceding pedals.

8. Specifications

Cins:	TANLA1
Output Wattage:	5 Watt
Çavkaniya hêzê:	Corded Electric (18V DC, center negative)
Amûrên Lihevhatî:	Gîtar
Tîpa girêdanê:	1/4" Jack (Input, Speaker Out, FX Loop), 3.5mm Jack (Phones/Line Out, AUX In)
Giraniya Babetê:	15.5 onsan (nêzîkî 440 gram)
Mezinahiyên hilberê:	2.34 x 5.03 x 2.95 înç (nêzîkî 5.9 x 12.8 x 7.5 cm)
Cureyê materyalê:	Tev stîl
Reng:	Reş

9. Agahdariya Garantiyê

Hotone products typically come with a limited manufacturer's warranty. For specific details regarding the warranty period, coverage, and terms for your Hotone Nano Legacy British Invasion amplifier head, please refer to the warranty card included with your purchase or visit the official Hotone webmalper. Delîla kirîna xwe ji bo îdiayên garantiyê biparêzin.

10. Piştgiriya Mişterî

If you encounter any issues not covered in this manual or require further assistance, please contact Hotone customer support. You can usually find contact information, including email and phone numbers, on the official Hotone website.

Visit Hotone Audio Support Page (Mînakampgirêdan, girêdana rastîn dibe ku cûda bibe)

HOTONE TANLA1