HOTONE TANLA2

Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Serî Instruction Manual

1. Destpêk

Spas ji bo kirînêasing the Hotone Nano Legacy Purple Wind 5-Watt Compact Guitar Amp Head. This ultra-compact amplifier head is designed to deliver premium guitar tones, inspired by the legendary Marshall Plexi Super Lead 1959, in a portable format. This manual provides essential information for safe and effective use of your ampzindîtir.

2. Agahiyên Ewlekariyê

  • Çavkaniya hêzê: Use only the specified power adapter (18V DC, center negative).
  • Perwanekirin: Ji bo pêşîlêgirtina germbûna zêde, hewaya rast bicîh bikin. Vebûnên hewayê asteng nekin.
  • Şilî: Amûrê li ber baran, şilbûn, an jî şilbûna zêde nehêlin.
  • Handling: Handle with care. Avoid dropping or subjecting the unit to strong impacts.
  • Xizmetkirin: Do not attempt to service this unit yourself. Refer all servicing to qualified personnel.
  • Têkiliya Axaftvan: Her tim pê ve girêdidin amplifier to a speaker cabinet with the correct impedance (4-16Ω) before powering on to prevent damage.

3. Hilbera Serîview

The Hotone Nano Legacy Purple Wind is a compact 5-watt guitar amplifier head featuring a 3-band EQ and an FX loop. Its design is inspired by classic British rock tones.

Control Panel Eniya

Hotone Nano Legacy Purple Wind front panel controls diagram
Wêne 1: Kontrolên Panela Pêşiyê. This image displays the front panel of the Hotone Nano Legacy Purple Wind amplifier head, highlighting the input jack, Bass, Middle, Treble, Gain, and Volume knobs, and the On/Off switch.
  1. BEYAN: 1/4" mono jack to plug in your guitar.
  2. BASS: Controls the low frequency response.
  3. NAVÎN: Controls the mid frequency response.
  4. SESBIK: Controls the high frequency response.
  5. QEZENC: Controls the gain level.
  6. BEND: Hêjmara derketinê kontrol dike.
  7. Veguheztina ON/OFF: Hêza yekîneyê vedike an vedike.

Têkiliyên Panela Paşê

Hotone Nano Legacy Purple Wind rear panel connections diagram
Wêne 2: Girêdanên Panela Paşîn. This image shows the rear panel of the Hotone Nano Legacy Purple Wind amplifier head, detailing the 18V DC input, Phones/Line Output, AUX IN, FX Loop Send/Return, and Speaker Output.
  1. 18V DC: Plug in DC 18V adapter (center negative).
  2. TELEFON/XET DERKETIN: 1/8" stereo jack, for using headphones or recording.
  3. AUX IN: 1/8" stereo jack, for connecting an external music player.
  4. VEGERA FX LOOP: 1/4" mono jack, connect to your effects output jack.
  5. DERKETINA AXAFTARÊ: 1/4" mono jack, connect to your cabinet (speaker 4-16Ω).
  6. FX LOOP SEND: 1/4" mono jack, connect to your effects input jack (The Effects Loop is a patch point between the pre-amp û hêz amp).

4. Sazkirin

  1. Connect Speaker Cabinet: Before powering on, connect a speaker cabinet (4-16Ω impedance) to the SPEAKER OUTPUT jack on the rear panel using a 1/4" mono speaker cable. Failure to connect a speaker cabinet before powering on can damage the ampzindîtir.
  2. Hêza girêdanê: Plug the included 18V DC power adapter into the 18V DC input on the rear panel, then plug the adapter into a suitable power outlet.
  3. Connect Guitar: Plug your guitar into the INPUT jack on the front panel using a 1/4" mono instrument cable.
  4. Mîhengên destpêkê: Turn the VOLUME and GAIN knobs to their minimum (counter-clockwise) positions before powering on.
  5. Hêzdarkirin: Flip the ON/OFF switch to the 'ON' position. The indicator light will illuminate.

5. Telîmatên Operating

  • Rêkxistina Dengê: Use the BASS, MIDDLE, and TREBLE knobs to shape your desired tonal characteristics. Experiment with different settings to find your preferred sound.
  • Rêzkirina qezencê: The GAIN knob controls the amount of overdrive and distortion. Turn clockwise for more aggressive tones.
  • Serastkirina Volume: The VOLUME knob controls the overall output level of the amplifier. Adjust to your desired listening level.
  • Using the FX Loop: Connect external effects pedals between the FX LOOP SEND and FX LOOP RETURN jacks to integrate them into your signal chain after the preamp liq.
  • Headphone/Line Out: For silent practice or direct recording, connect headphones or a line-level device to the PHONES/LINE OUTPUT. This output includes speaker cabinet simulation.
  • AUX IN: Connect an external audio source (e.g., MP3 player, smartphone) to the AUX IN jack to play along with backing tracks.

6. Maintenance

  • Paqijî: Ji bo paqijkirina qumaşê nerm û hişk bikar bînin amplifier's exterior. Do not use liquid cleaners or solvents.
  • Embarkirinî: Depo bikin ampLi cîhekî sar û hişk, dûr ji tîrêjên rojê yên rasterast û germahiyên zêde hilînin.
  • Lênihêrîna Lûleyê: As a hybrid amplifier, pêşamp tube may eventually need replacement. If you notice a significant change in tone or performance, consult a qualified technician.

7. Destpêkirin

PirsegirêkSedema gengazÇare
Deng tunePower not connected, speaker not connected, volume/gain too low, faulty cable.Check power connection, ensure speaker is connected, increase volume/gain, test with different cables.
Dengê qels an tehrîbFaulty cable, incorrect impedance, worn preamp lûle.Test cables, ensure correct speaker impedance, consult technician for tube replacement.
Excessive hum/noiseGround loop, faulty power supply, interference from other electronics.Try different power outlets, use a power conditioner, move away from other electronic devices.

8. Specifications

  • Output Wattage: 5 Watt
  • Çavkaniya hêzê: Corded Electric (18V DC, center negative)
  • Giraniya Babetê: 15.5 onsan
  • Mezinahiyên hilberê: 2.34 x 5.03 x 2.95 inches
  • Amûrên Lihevhatî: Gîtar
  • Tîpa girêdanê: 6.35mm Jack (Input, Speaker Output, FX Loop Send/Return), 3.5mm Jack (Phones/Line Out, AUX IN)
  • Impedance Axaftvan: 4-16 Ohm
  • Hejmara Model: TANLA2

9. Vîdyoyên Berheman

OriPure 5W Tube Guitar Amplifier Serî

Danasîna Vîdyoyê: This video showcases the OriPure 5W Tube Guitar Amplifier Head, demonstrating its features and sound. It highlights the tube components and various controls, providing an overview of its performance capabilities.

The Joyo Jackman II Is Like A Tiny Marshall JCM 800.

Danasîna Vîdyoyê: This video provides a detailed review and demonstration of the Joyo Jackman II amplifier head, comparing its sound characteristics to a Marshall JCM 800. It covers clean and dirty tones, control adjustments, and overall performance.

OriPure 15W Tube Guitar Amplifier Head OA-H15

Danasîna Vîdyoyê: This video demonstrates the OriPure 15W Tube Guitar Amplifier Head (Model OA-H15), showcasing its sound quality and features. It includes various guitar riffs and tone adjustments to illustrate its versatility.

JOYO Meteor II BanTamp XL Series Mini Amp Head 20 Watt

Danasîna Vîdyoyê: This video presents the JOYO Meteor II BanTamp XL Series Mini Amp Head, a 20-watt hybrid tube amplifier. It demonstrates the amplifier's clean and overdrive channels, tone controls, and built-in Bluetooth functionality for playing backing tracks.

Valeton Guitar Amplifier Head TAR-20G Amp Pedal Platform Studio Desktop with CAB SIM

Danasîna Vîdyoyê: This video showcases the Valeton Guitar Amplifier Head TAR-20G, highlighting its features as an amp pedal platform and desktop studio amplifier with built-in cab simulation. It demonstrates various tones and connectivity options.

JOYO 20W Amplifier Head BanTamP Series ATOMIC

Danasîna Vîdyoyê: This video features the JOYO 20W Amplifier Head from the BanTamP Series, specifically the ATOMIC model. It demonstrates the amplifier's sound characteristics and features, designed for AC lovers.

10. Garantî û Piştgirî

For warranty information and technical support, please refer to the official Hotone webmalperê an jî bi firoşkarê xwe yê destûrdar re têkilî daynin. Fatûra kirîna xwe wekî delîla kirînê biparêzin.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.