Orbit 94886 Pocket Star Ultima 6-Station Indoor Irrigation Controller User Manual

1. Destpêk

The Orbit 94886 Pocket Star Ultima is a digital irrigation controller designed for indoor use, capable of managing up to 6 watering stations. This manual provides comprehensive instructions for the installation, programming, and operation of your new irrigation timer, ensuring efficient and effective watering for your landscape. Its user-friendly interface, featuring a large LCD display and intuitive buttons, simplifies the programming process.

2. Agahiyên Ewlekariyê

• This controller is designed for indoor use only. Do not install it outdoors or in areas exposed to direct weather conditions.
• Berî ku hûn her têl an tamîrkirinê bikin, piştrast bikin ku dabînkirina elektrîkê qut bûye.
• Use only the specified 24V AC power adapter. Using an incorrect power supply can damage the unit and void the warranty.
• Keep the controller away from water sources and high humidity to prevent electrical hazards.
• Do not attempt to open or repair the controller yourself. Refer all servicing to qualified personnel.

3. Naveroka pakêtê

Your Orbit 94886 Pocket Star Ultima package should contain the following item:

• One (1) Orbit 94886 Pocket Star Ultima 6-Station Indoor Irrigation Controller.

4. Hilbera Serîview

The Orbit Pocket Star Ultima controller features a clear LCD display, intuitive navigation buttons, and a rotary dial for easy program selection. The terminal block for wiring is located at the bottom of the unit, protected by a removable cover.

Wêne 4.1: Pêşî view of the Orbit 94886 Pocket Star Ultima controller, showing the LCD screen, control buttons, and rotary dial.

Figure 4.2: The controller with its bottom cover attached, illustrating its compact design.

5. Sazkirin

5.1. Sazkirin

The Orbit 94886 controller is designed for indoor installation. Choose a clean, dry location away from direct sunlight and extreme temperatures. Mount the unit securely to a wall using appropriate screws and anchors.

Wêne 5.1: Mînakample installation diagram, showing the indoor controller connected to an outdoor irrigation valve.

5.2. Têlkirin

Before wiring, ensure the power supply to the controller is disconnected. The terminal block is located at the bottom of the unit. Use simple tool-less "push-in" terminals for easy wire connections.

• Common Wire (COM): Connect the common wire from your irrigation valves to the terminal labeled "COM". This is typically a white wire.
• Station Wires (1-6): Connect each individual valve wire to its corresponding station terminal (1 through 6).
• Rain Sensor (SENSOR): If using a rain sensor (sold separately), connect its wires to the "SENSOR" terminals. The controller supports a normally closed rain sensor.
• Pump Start Relay (PUMP): If you have a pump start relay or master valve, connect its wires to the "PUMP" terminals.
• 24V AC Power (24VAC): Connect the 24V AC power adapter wires to the "24VAC" terminals.

Wêne 5.2: Berfireh view of the wiring terminal block, showing connections for 24VAC, SENSOR, COM, stations 1-6, and PUMP.

Important Power Limitation Warning:

The controller's power supply has specific current limitations. Each valve connected should not exceed 150mA (milliampere) at 24V. The total current drawn by all simultaneously active valves must not exceed 500mA. For example, if your valves draw 150mA each, you can operate a maximum of 3 valves simultaneously. If your valves draw 220mA each, you can operate a maximum of 2 valves simultaneously. Exceeding these limits can damage the controller.

6. Telîmatên Operating

The controller features a rotary dial to select different functions and buttons for navigation and setting values.

Figure 6.1: Controller interface with a guide to button and dial functions.

6.1. Rotary Dial Functions

• SEATÊ DIKE: Ji bo destnîşankirina roja û dema niha tê bikar anîn.
• ROJA SET: Used to set the current year, month, and day.
• DEMA DESTPÊKÊ: Used to set the start times for your watering programs.
• DEMA RUNNE: Used to set the duration for each watering station (1 to 99 minutes).
• ÇEND CARAN CAREKÊ: Used to set the watering frequency (e.g., specific days of the week, odd/even days).
• TRIMBÊL: The default operating mode where programmed schedules run automatically.
• JI: Disables all watering programs and functions.

6.2. Fonksiyon Bişkojk

• DERBASBÛN: Confirms a setting or moves to the next step.
• DESTÎ: Initiates manual watering.
• ZELAL: Clears a setting or program.
• DENGÎ BARANÊ: Activates the rain delay function (24, 48, or 72 hours).
• PROGRAM A-B: Switches between independent programs (A, B, C). The controller supports 3 independent programs.
• +/- Bişkok: Adjust numerical values up or down.
• Arrow Buttons (Left/Right): Navigate through settings or stations.

6.3. Programming Your Controller

1. Set Current Time and Date: Diyalê bizivirînin ser SET CLOCK û ROJA SET. Use the +/- buttons to adjust values and ENTER to confirm.
2. Bernameyê Hilbijêre: Bitikîne PROGRAM A-B button to select Program A, B, or C. Each program can have up to 4 start times.
3. Demjimêrên Destpêkê Diyar Bike: Diyalê bizivirînin ser DEMA DESTPÊKÊ. Use the +/- buttons to set up to four start times for the selected program. Press ENTER after each time.
4. Demên Xebitandinê Saz Bike: Diyalê bizivirînin ser DEM RUN. Use the arrow buttons to select each station (1-6) and the +/- buttons to set the watering duration (1-99 minutes) for that station. Press ENTER after each.
5. Frekansa Avdanê Diyar Bike: Diyalê bizivirînin ser ÇEND CARAN CAREKÊ. Select specific days of the week, or choose odd/even day watering. Use the arrow and +/- buttons to make your selections.
6. Bernameyê çalak bike: Diyalê bizivirînin ser AUTO to enable the programmed schedule.

6.4. Operasyona Manual

To water manually, turn the dial to AUTO, paşê pêl pê bikin DESTÎ button. Use the arrow buttons to select the desired station and the +/- buttons to set the run time. Press ENTER to start manual watering. The controller will return to automatic mode after the manual cycle is complete.

6.5. Fonksiyona Derengketina Baranê

If rain is expected or has occurred, you can temporarily suspend watering. Turn the dial to AUTO, paşê pêl pê bikin BARAN DENGÎ button. Use the +/- buttons to select a delay of 24, 48, or 72 hours. The controller will automatically resume the programmed schedule after the delay period.

7. Maintenance

• Keep the controller clean and free from dust and debris. Use a soft, dry cloth for cleaning.
• Ensure the installation area remains dry and protected from moisture.
• Ji bo ku hûn piştrast bin ku girêdanên têlan bi ewlehî ne, bi rêkûpêk kontrol bikin.
• During winter months in cold climates, it is recommended to disconnect the controller and store it indoors to prevent damage from freezing temperatures.

8. Destpêkirin

9. Specifications

• Nîşan: Orbit
• Cins: 94886
• Hejmara Stasyonan: 6
• Lêkirinî: Indoor
• Ketina Hêzê: 24 Volt AC
• Max Current per Valve: 150mA (0.15A)
• Max Total Current: 500mA (0.5A)
• Pîvanên hilberê (LxWxH): 14.6 cm x 6.2 cm x 23.5 cm
• Mal: Pîlastîk
• Tîpa Nîşandanê: LCD
• Germahiya xebitandinê: 10 Degrees Celsius (minimum, typical operating range is wider)
• Lihevhatina Mala Smart: Ne lihevhatî ye
• UPC: 046878941267

10. Garantî

The Orbit 94886 Pocket Star Ultima 6-Station Indoor Irrigation Controller comes with a 3-Sal Garantiya Limited from the date of purchase. This warranty covers defects in materials and workmanship under normal use. Please retain your proof of purchase for warranty claims. The warranty does not cover damage caused by improper installation, misuse, accidents, unauthorized repairs, or exceeding the specified electrical current limits.

11. Piştgirî

For technical assistance, troubleshooting beyond this manual, or warranty inquiries, please contact Orbit customer support. You can typically find contact information on the Orbit webli ser malperê an jî li ser pakkirina hilberê.

Orbit Worldwide Webmalper: www.orbitonline.com