Einhell 4300345 TH-MS 2513 T Miter and Table Saw Instruction Manual

1. Destpêk

Thank you for choosing the Einhell TH-MS 2513 T Miter and Table Saw. This versatile power tool is designed for precise cutting of wood, plastic, and non-ferrous metals, offering both miter saw and table saw functionalities. This manual provides essential information for the safe and efficient operation, setup, maintenance, and troubleshooting of your saw. Please read these instructions carefully before first use and keep them for future reference.

Wêne 1: Serview of the Einhell TH-MS 2513 T Miter and Table Saw.

2. Telîmatên Ewlekariyê

Always observe the following safety precautions to prevent electric shock, fire, and serious injury:

• Hemûya rêbernameyê bixwîne: Understand all instructions and warnings before operating the saw.
• Amûrên parastina kesane (PPE) li xwe bikin: Always wear safety glasses, hearing protection, and a dust mask. Use gloves when handling saw blades.
• Cihê xebatê paqij û ronî bihêlin: Deverên tevlihev an tarî qezayan vedixwînin.
• Di atmosferên teqîner de kar nekin: Do not use power tools in the presence of flammable liquids, gases, or dust.
• Parçeya xebatê ya ewle: Her tim clamp or hold the workpiece firmly to prevent movement during cutting.
• Use correct blade: Ensure the saw blade is sharp, clean, and suitable for the material being cut. Never use damaged or dull blades.
• Piya û hevsengiya rast biparêzin: Zêdeyî negirin.
• Ji hev veqetandina hêzê: Always unplug the saw before making adjustments, changing accessories, or performing maintenance.
• Keep guards in place: Never operate the saw without all guards properly installed and functioning.
• Ji destpêkirina şaş dûr bixin: Ensure the switch is in the off-position before plugging in the tool.

3. Sazkirin

3.1 Vekirin û Teftîşkirin

Carefully remove all components from the packaging. Inspect the saw for any damage that may have occurred during shipping. Do not operate the saw if any parts are damaged or missing. Contact customer support immediately.

3.2 Civîn

The Einhell TH-MS 2513 T requires minimal assembly. Ensure all included components, such as the push stick and any necessary guards, are properly attached according to the diagrams in the separate assembly guide (if provided). The work table is made of lightweight and stable cast aluminum, designed for precise work.

3.3 Saw Blade Installation

1. Ji hev veqetandina hêzê: Piştrast bike ku makîneya kêrê ji çavkaniya hêzê veqetandî ye.
2. Open blade guard: Carefully lift or open the blade guard to access the blade arbor.
3. Install blade: Place the saw blade (Ø 250 x Ø 30 x 2.8 mm, 36 teeth) onto the arbor, ensuring the rotation direction indicated on the blade matches the arrow on the saw.
4. Secure blade: Fasten the blade with the provided washer and arbor nut, tightening securely.
5. Close guard: Return the blade guard to its original position.

Figure 2: Saw blade and protective guard in miter saw configuration.

4. Telîmatên Operating

4.1 Operasyona Giştî

Before starting, ensure your workpiece is stable and properly supported. Always allow the blade to reach full speed before beginning a cut. Feed the material slowly and steadily. Never force the saw.

4.2 Miter Saw Function

The miter saw function allows for precise cross-cuts and miter cuts. Adjust the miter angle by loosening the locking knob, setting the desired angle (-45°/0°/+45°), and re-tightening the knob. For bevel cuts, adjust the saw head tilt. Ensure the workpiece is firmly against the fence.

• Kapasîteya birrîna li 90°: 130 x 75 mm
• Kapasîteya birrîna li 45°: 120 x 50 mm
• Cutting Capacity at 2 x 45° (Compound Miter): 70 x 35 mm

Figure 3: Adjusting the miter angle for precise cuts.

4.3 Table Saw Function

To use the saw as a table saw, lock the saw head in the upright position. Adjust the cutting height (0–40 mm) using the height adjustment mechanism. Use the parallel fence for rip cuts and the push stick for feeding smaller workpieces. The table surface measures 416 x 352 mm.

Figure 4: Adjusting the cutting height for table saw operation.

4.4 Derxistina tozê

The saw is equipped with a dust funnel behind the saw blade for improved sawdust collection. Connect a suitable dust extractor to the dust port to maintain a clean work environment and improve visibility during operation.

Figure 5: Dust extraction port for connecting a vacuum system.

5. Maintenance

Parastina birêkûpêk temenê dirêj û xebata ewle ya makîneya we garantî dike.

• Paqijî: After each use, disconnect the saw from power and clean off sawdust and debris using a brush or compressed air. Do not use solvents that could damage plastic parts.
• Teftîşa Blade: Tîrêja kêrê bi rêkûpêk ji bo tûjbûn, şikestin, an jî windabûna diranan kontrol bike. Tîrên bêronî an jî zirar dîtî tavilê biguherîne.
• Guard Functionality: Ensure all guards move freely and return to their protective positions.
• Rûnkirin: Apply a light coat of machine oil to moving parts as recommended in the full manual (if applicable).
• Korda hêzê: Check the power cord for damage. Do not use the saw if the cord is frayed or cut.

6. Destpêkirin

Ev beş pirsgirêkên hevpar ên ku dibe ku hûn rastî wan werin çareser dike. Ji bo pirsgirêkên ku li vir nehatine navnîş kirin, bi piştgiriya xerîdar re têkilî daynin.

7. Specifications Teknîkî

8. Garantî û Piştgirî

8.1 Garantî

This Einhell product comes with a Garantiya 2-salî from the date of purchase. Please retain your proof of purchase for warranty claims. The warranty covers defects in material and workmanship under normal use. It does not cover damage caused by misuse, abuse, unauthorized repairs, or normal wear and tear.

8.2 Piştgiriya Mişterî

For technical assistance, spare parts, or warranty inquiries, please contact Einhell customer support. You can find contact information on the official Einhell webmalperê an bi rêya firoşkarê xwe yê herêmî.

Webmalper: www.einhell.com

Please have your model number (4300345) and serial number (if applicable) ready when contacting support.