Einhell Rotary Hammer TC-RH 800 E Instruction Manual

1. Destpêk

Thank you for choosing the Einhell TC-RH 800 E Rotary Hammer. This powerful tool is designed for drilling, hammer drilling, and chiseling in concrete, masonry, wood, and metal. It features an 800W motor, 2.5 Joules of impact energy, and an SDS Plus chuck for quick and secure bit changes. Please read this manual thoroughly before operating the tool to ensure safe and efficient use.

2. Telîmatên Ewlekariya Giştî

Always observe the following safety precautions when using power tools:

• Ewlehiya Qada Kar: Cihê kar paqij û baş ronîkirî bihêle. Cihên tevlihev an tarî dibin sedema qezayan. Amûrên elektrîkê di atmosferên teqîner de, wek mînak li hebûna şilek, gaz, an tozên şewatbar, nexebitînin.
• Ewlehiya Elektrîkê: Divê pêvekên amûrên elektrîkê bi prizê re li hev bikin. Bi tu awayî pêvekê neguherînin. Ji têkiliya laş bi rûberên erdî an jî yên wekî boriyan, radyatoran, sobeyan û sarincan dûr bisekinin.
• Ewlehiya Kesane: Always wear eye protection. Use hearing protection when operating noisy tools. Wear a dust mask if operations create dust. Dress properly; avoid loose clothing or jewelry. Secure long hair.
• Bikaranîna Amûr û Lênêrînê: Amûra elektrîkê bi zorê bikar neynin. Ji bo serîlêdana xwe amûra elektrîkê ya rast bikar bînin. Berî ku hûn her sererastkirinekê bikin, aksesûaran biguherînin, an amûrên elektrîkê hilînin, fîşê ji çavkaniya elektrîkê veqetînin.
• Xizmetkar: Amûra xweya hêzê ji hêla kesek tamîrê ya jêhatî ve were servîs kirin ku tenê parçeyên guhezbar ên wekhev bikar tîne. Ev ê piştrast bike ku ewlehiya amûra hêzê tê parastin.

3. Components Product

Familiarize yourself with the main components of your Einhell TC-RH 800 E Rotary Hammer:

• SDS Plus Chuck
• Handle Alîkarî
• Kûrahî Rawestandin
• Mode Selector Switch (Drill, Hammer Drill, Chisel)
• Rotation Direction Switch (Forward/Reverse)
• On/Off Trigger with Speed Control
• Bişkoka Kilîtkirinê (ji bo xebitandina domdar)

Wêne 1: Serview of the Einhell TC-RH 800 E Rotary Hammer.

Figure 2: The rotary hammer in use, demonstrating its application for drilling into a wall.

Wêne 3: Ji nêzîk ve view of the SDS Plus chuck, designed for quick and secure bit changes.

Figure 4: Detail of the rotation direction switch, allowing selection between forward and reverse rotation.

Figure 5: The ergonomic main handle designed for comfortable and secure grip.

Figure 6: The adjustable depth stop, used to set a precise drilling depth.

Figure 7: Einhell brand logo prominently displayed on the tool body, indicating authenticity.

4. Sazkirin

4.1 Girêdana Destika Alîkar

The auxiliary handle provides additional grip and control. Loosen the auxiliary handle by turning it counter-clockwise. Slide it onto the tool body to the desired position and tighten it clockwise.

4.2 Installing the Depth Stop

Insert the depth stop rod into the designated hole on the auxiliary handle. Adjust the depth stop to the required drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.

Figure 8: The SDS Plus chuck with the depth stop rod correctly installed.

4.3 Inserting SDS Plus Drill Bits/Chisels

1. Clean the shank of the drill bit or chisel and apply a thin layer of grease.
2. Pull back the chuck sleeve and insert the bit into the chuck, rotating it slightly until it engages.
3. Release the chuck sleeve. Pull the bit to check if it is securely locked. The bit should have a small amount of axial play, which is normal for SDS Plus systems.

5. Telîmatên Operating

5.1 Hilbijartina Mode

The mode selector switch allows you to choose the appropriate operating mode:

• Qulkirin (Tenê Zivirandin): For drilling in wood, metal, or plastics.
• Qulkirina bi Çekûç (Zivistan bi Bandorê): Ji bo qulkirina li ser beton û keviran.
• Çîselkirin (Tenê bi bandor): For light chiseling work, such as removing tiles or plaster.

To change the mode, rotate the selector switch to the desired symbol. Ensure the tool is unplugged before changing modes, especially for chiseling, to prevent accidental activation.

5.2 Vekirin/Girtin û Kontrola Lezê

Press the On/Off trigger to start the tool. The speed is variable depending on how far you press the trigger. For continuous operation, press the lock-on button while the trigger is fully depressed. To switch off, release the trigger or press it again if the lock-on button is engaged.

5.3 Rotation Direction

Use the rotation direction switch (Figure 4) to select forward or reverse rotation. Forward rotation is for drilling and hammer drilling. Reverse rotation is primarily for unscrewing or freeing jammed drill bits. Change the rotation direction only when the tool is switched off.

6. Maintenance

Parastina birêkûpêk temenê dirêj û performansa çêtirîn a çekûçê weya rotary misoger dike.

• Paqijî: Keep the ventilation slots clean to prevent overheating. Wipe the tool housing with a soft, damp çît. Paqijkerên hişk an solvanan bikar neynin.
• Parastina Çakê: Regularly clean the SDS Plus chuck and apply a small amount of special grease to the bit shanks to ensure smooth operation and prevent wear.
• Kontrola kordê: Periodically inspect the power cord for any damage. If damaged, have it replaced by a qualified technician.
• Embarkirinî: Store the tool in its original case in a dry, secure place, out of reach of children.

7. Destpêkirin

8. Specifications Teknîkî

9. Agahdariya Garantiyê

Einhell products are manufactured to high-quality standards and are subject to strict quality controls. This product is covered by the manufacturer's warranty in accordance with the country-specific legal provisions. For detailed warranty terms and conditions, please refer to the warranty card included with your product or visit the official Einhell website.

10. Piştgirî

Should you have any questions regarding the operation, maintenance, or troubleshooting of your Einhell TC-RH 800 E Rotary Hammer, please contact Einhell customer service or visit our official webmalperê ji bo alîkarî û çavkaniyên bêtir.

Fermî Webmalper: www.einhell.com