Pirtûka Bikarhêner a Projektora DLP ya Portable ya InFocus IN112

1. Destpêk

This manual provides essential information for the safe and efficient operation of your InFocus IN112 Portable DLP Projector. Please read these instructions thoroughly before using the projector and retain them for future reference.

The InFocus IN112 is designed for versatile use, offering high brightness and a strong contrast ratio. It incorporates BrilliantColor technology for clear image reproduction and is 3D-ready. Its compact and lightweight design facilitates easy portability and installation.

2. Çi di Qutîkê de ye

Piştrast bike ku hemû tiştên ku li jêr hatine navnîş kirin di pakêta hilbera te de hene:

• Projektorê InFocus IN112
• Corda hêzê
• RGB cable (VGA cable)
• A/V cable (Composite Video cable)
• talîmatên ewlehiyê
• Destûra bikarhêner (ev belge)
• Kontrola dûr

3. Projektor Serview

Wêne 1: Ser View - Displays the control panel with buttons for power, source selection, menu navigation, and keystone adjustment, along with the focus ring for the lens.

Wêne 2: Alî View - Shows the ventilation grilles essential for heat dissipation during operation. Ensure these are not obstructed.

Wêne 3: Bişkavkirî View bi Remote - Illustrates the projector from an angle, highlighting the lens and the included remote control for convenient operation.

jimar 4: Paş View - Details the various input and output ports, including power, audio in/out, video, computer (VGA), RS232, and Mini USB.

4. Sazkirin

4.1 Cihkirin

Position the projector on a stable, flat surface or mount it securely. Ensure adequate ventilation around the projector to prevent overheating. The distance from the screen will determine the image size. Adjust the projector's position to achieve the desired image size and clarity.

4.2 Girêdana Hêzê

1. Connect the supplied power cord to the projector's power inlet.
2. Dawiya din ê kabloya elektrîkê têxin nav dergehek elektrîkê ya bi erdê re.

4.3 Girêdana Çavkaniyên Têketinê

The IN112 projector offers multiple input options:

• VGA (Computer In 1 & 2): Use the RGB cable to connect to a computer's VGA output.
• Vîdyoya Pêkhatî: Use the A/V cable to connect to devices with composite video output.
• S-Vîdeo: Connect to devices with S-Video output.
• Deng Di: Connect external audio sources using a 3.5mm stereo cable.
• RS232C: For control and automation systems.
• USB B Mini: For control and firmware updates.

Berî ku hûn projektorê vekin, piştrast bikin ku hemî kablo bi ewlehî ve girêdayî ne.

5. Telîmatên Operating

5.1 Power On / Off

• Ji bo çalakkirinê, pêl pê bikin Erk button on the control panel or remote control. The power indicator light will illuminate.
• Ji bo veqetandinê, pêl pê bikin Erk button again. Confirm shutdown if prompted. Allow the projector to cool down before unplugging.

5.2 Vejandina Wêne

• Focus: Xeleka fokusê ya li ser lensa projektorê bizivirînin heta ku wêne tûj û zelal bibe.
• Keystone: Bi kar tînin Keystone buttons on the control panel or remote to correct trapezoidal image distortion if the projector is not perfectly perpendicular to the screen.

5.3 Hilbijartina Çavkaniyê

Bitikîne Kanî button on the control panel or remote control to cycle through available input sources (VGA1, VGA2, Video, S-Video).

5.4 Navîgasyon Menu

Bitikîne Menu / Derketin button to access the on-screen display (OSD) menu. Use the arrow buttons to navigate and the Neqandin or Derbasbûn button to confirm selections. Press Menu / Derketin again to close the menu.

5.5 Moda Eco

Ji bo dirêjkirina l Moda Eco çalak bikeamp life and reduce power consumption. This mode is suitable for environments with lower ambient light. The lamp life is approximately 6,000 hours in Eco Mode compared to 5,000 hours in normal mode.

5.6 3D Content Projection

The IN112 is 3D-ready. To project 3D content, you will need compatible 3D source material, a 3D-capable player, and active 3D glasses (sold separately). Refer to your 3D source device's manual for specific setup instructions.

6. Maintenance

6.1 Lamp Diber

Projektor lamp temenê wê sînordar e. Dema ku lamp nîşana (Temp/Lamp) illuminates or the image brightness significantly decreases, the lamp may need replacement. The lamp door is conveniently located on the top of the projector for easy access, even when installed.

Baldaynî: Ensure the projector is powered off and completely cooled before attempting lamp replacement. Refer to the detailed lamp replacement instructions in the full service manual for safety and proper procedure.

6.2 Paqijkirin

The IN112 projector is designed without filters, eliminating the need for filter cleaning or replacement. Periodically wipe the exterior casing with a soft, dry cloth. For the lens, use a specialized lens cleaning cloth and solution to avoid scratches.

7. Destpêkirin

8. Specifications

9. Garantî û Piştgirî

9.1 Garantiya Hilberê

The InFocus IN112 projector is backed by a comprehensive warranty:

• 5-salî ermanî sînorkirî li ser projektorê.
• 2-salî ermanî full covering parts and labor.
• Garantiya 6 mehan li ser lamp.

Please retain your proof of purchase for warranty claims. For detailed terms and conditions, refer to the official InFocus warranty documentation or visit the InFocus website.

9.2 Piştgiriya Teknîkî

For technical assistance, troubleshooting, or service inquiries, please contact InFocus customer support. Contact information can typically be found on the InFocus official webmalper an jî di belgeyên pêvekirî de.

10. Related Product Information (IN130 Series)

Vîdyoya jêrîn nêrînek berfirehtir pêşkêş dikeview of features found in the InFocus IN130 Series projectors. While specific models may vary, many core functionalities and design principles are shared across InFocus projector lines, offering general insight into InFocus projector capabilities.