Lisle 59000

Lisle 59000 Ratcheting Serpentine Belt Tool Instruction Manual

Brand: Lisle | Model: 59000

Pêşkêş

This manual provides detailed instructions for the safe and effective use of your Lisle 59000 Ratcheting Serpentine Belt Tool. This tool is designed to simplify the removal and installation of serpentine belts on vehicles equipped with spring-loaded idler pulleys.

Agahiyên Ewlekariyê

  • Always wear appropriate personal protective equipment, including safety glasses and gloves, when working on vehicles.
  • Ensure the vehicle is stable and properly supported before beginning any work.
  • Disconnect the battery to prevent accidental starting or electrical hazards.
  • Exercise caution when releasing belt tension, as pulleys can snap back with force.
  • Refer to your vehicle's specific service manual for detailed instructions on belt routing and tensioner operation.

Naveroka pakêtê

The Lisle 59000 Ratcheting Serpentine Belt Tool includes the following components:

  • Ratcheting Serpentine Belt Tool Handle
  • Berfirehkirina Bar
  • Various Low-Profile Sockets (including 19mm for Honda and Toyota)
  • Manufactured Brand Product
Lisle 59000 Ratcheting Serpentine Belt Tool with handle, extension, and various sockets

Figure 1: Lisle 59000 Ratcheting Serpentine Belt Tool components.

Damezirandin

  1. Soketa Guncaw Hilbijêre: Identify the correct size socket required for your vehicle's serpentine belt tensioner pulley bolt. The kit includes various low-profile sockets, including a 19mm socket for Honda and Toyota applications.
  2. Soketê girêbide: Securely attach the selected socket to the ratcheting head of the tool handle.
  3. Use Extension (if needed): For hard-to-reach idler pulleys, attach the extension bar between the ratcheting handle and the socket.

Telîmatên Operating

This tool is designed to release tension on serpentine belts with a spring-loaded idler pulley.

  1. Amûrê bi cih bikin: Place the assembled tool onto the serpentine belt tensioner pulley bolt. Ensure the socket is fully engaged with the bolt head.
    2. Lisle 59000 tool engaged with a serpentine belt tensioner pulley

    Figure 2: Tool positioned on the tensioner pulley bolt.

  2. Set Ratcheting Head: Set the ratcheting head to the middle or neutral/freewheel position. This allows for initial positioning without engaging the ratchet mechanism.
  3. Apply Leverage: Apply steady pressure to the tool handle to rotate the tensioner pulley and release tension from the serpentine belt. The freewheel position allows maximum leverage.
    4. Hand applying pressure to the Lisle 59000 tool to release belt tension

    Figure 3: Applying leverage to release belt tension.

  4. Lock Ratchet (if needed): Once the maximum travel point is reached, click the lever into place to lock the ratchet mechanism, holding the tensioner in the released position. This can be useful for maintaining tension release while manipulating the belt.
  5. Remove/Install Belt: Carefully remove the old serpentine belt or install the new one.
  6. Release Tensioner: Once the belt is in place, release the ratchet mechanism and slowly allow the tensioner to return to its original position.
  7. Verify Belt Routing: Double-check that the new belt is correctly routed around all pulleys according to your vehicle's specifications.

Lênerrînî

  • Paqijî: After each use, wipe the tool clean with a dry cloth to remove any grease, oil, or dirt.
  • Embarkirinî: Store the tool and its components in a dry, clean environment to prevent rust and damage.
  • Berçavderbasî: Periodically inspect the tool for any signs of wear, damage, or corrosion. Replace any damaged components immediately.

Çareserkirina pirsgirêkan

Issue: Tool does not fit tensioner bolt.

Çare: Ensure you are using the correct size socket for your vehicle's tensioner. The kit includes various sizes; consult your vehicle's service manual for the exact specification.

Issue: Difficulty reaching the tensioner.

Çare: Utilize the included extension bar to gain additional reach and leverage in confined engine compartments.

Issue: Ratchet mechanism not engaging or releasing bi rêkûpêk.

Çare: Check that the directional lever on the ratcheting head is fully engaged in either the forward, reverse, or neutral/freewheel position. Clean any debris that might be obstructing the mechanism.

Specifications

  • Nîşan: Lisle
  • Cins: 59000
  • Giraniya Babetê: 2 lîre
  • Hejmara Beşa Hilberîner: 59000
  • Hejmara Part OEM: 59000
  • Yekem Berdest: 12 Gulan 2008

Libersekînîn

Ji bo agahdariya garantiyê, ji kerema xwe bi malpera fermî ya hilberîner re têkilî daynin. webmalperê an bi piştgiriya xerîdarên wan re têkilî daynin.

Piştgiriya Mişterî

Ji bo arîkarî an lêpirsînên bêtir, ji kerema xwe biçin Lisle Store on Amazon or consult the official Lisle website.