Technoline WS 6810 Weather Station User Manual

1. Hilbera Serîview

The Technoline WS 6810 amber Weather Station is a sophisticated device designed to provide accurate indoor and outdoor temperature readings, precise timekeeping via DCF-77 radio control, and convenient alarm functions. Its modern design with a warm amber LED display and black high-gloss finish integrates seamlessly into any contemporary home environment. This manual provides detailed instructions for setting up, operating, and maintaining your weather station.

Wêne 1.1: Pêşî view of the Technoline WS 6810 Weather Station, displaying indoor and outdoor temperatures, current time, and alarm indicators.

2. Naveroka pakêtê

Ji kerema xwe naveroka pakêtê bi baldarî kontrol bikin. Ger tiştek wenda be an jî zirar dîtibe, tavilê bi firoşkarê xwe re têkilî daynin.

• 1 x Technoline WS 6810 Temperature Station (Main Unit)
• 1 x TX96 (TW004) Outdoor Sensor
• 1 x Power Supply Unit (220V)
• 1 x Rêbernameya Bikarhêner (ev belge)

Not: 3 x AAA Micro LR03 batteries for main unit backup and 2 x AAA Micro LR03 batteries for the outdoor sensor are ne tê de û divê cuda bên kirîn.

Figure 2.1: The Technoline WS 6810 main unit alongside its TX96 outdoor sensor.

3. Taybetmendiyên sereke

• DCF-77 Radio-Controlled Clock: Automatic time synchronization for precise timekeeping. Includes manual setting option and time zone adjustment (± 1 hour).
• Indoor and Outdoor Temperature Display: Monitors and displays current temperatures for both indoor and outdoor environments.
• Bîra germahiya hindik / herî zêde: Records and displays the highest and lowest temperatures measured.
• Dual Alarm Clocks: Two independent alarms (ALM1, ALM2) with adjustable settings.
• Fonksiyona Snooze: Provides a temporary pause for alarms, typically 5 minutes.
• Ronahiya Dîmenderê ya Verastbar: Two brightness levels for optimal visibility in various lighting conditions.
• Stand masê: Integrated stand for convenient desktop placement.
• Dîmendera LED: Clear, warm amber LED digits for easy readability.

4. Guide Setup

4.1. Hêzkirina Yekîneya Sereke

1. Connect the provided power supply unit to the DC IN port on the back of the WS 6810 main unit.
2. Plug the power adapter into a standard 220V electrical outlet. The display will illuminate.
3. Ji bo hêza yedek di dema ou detages, insert 3 x AAA Micro LR03 batteries (not included) into the battery compartment on the back of the main unit, observing polarity (+/-).

4.2. Installing Batteries in the Outdoor Sensor (TX96)

1. Open the battery compartment on the back of the TX96 outdoor sensor.
2. Insert 2 x AAA Micro LR03 batteries (not included), ensuring correct polarity.
3. Parçeya pîlê bi ewlehî bigire.

4.3. Initial Synchronization and Sensor Placement

1. Place the outdoor sensor within effective transmission range (typically up to 30 meters in open air) of the main unit. Avoid placing it near large metal objects, electrical appliances, or direct sunlight.
2. The main unit will automatically attempt to receive the DCF-77 radio signal for time synchronization and connect with the outdoor sensor. This process may take several minutes. A signal icon will appear on the display once synchronization is successful.
3. If the outdoor temperature does not appear after a few minutes, press the "SENSOR" button on the main unit to manually initiate a search for the outdoor sensor.

4.4. Time Zone Setting (if required)

If you are in a region where the DCF-77 signal's standard time differs from your local time (e.g., outside Central European Time), you may need to adjust the time zone.

1. In normal time display mode, press and hold the "SET" button until the time zone offset flashes.
2. Use the "+" or "-" buttons to adjust the time zone offset in ±1 hour increments.
3. Press "SET" again to confirm and exit.

Wêne 4.1: Ser view of the WS 6810, highlighting the control buttons for setup and operation.

5. Telîmatên Operating

5.1. Agahdariyê nîşan bide

The large LED display shows the following information:

• LI: Germahiya hundir.
• DERVE: Outdoor temperature (from TX96 sensor).
• Dem: Current time (radio-controlled).
• ALM1 / ALM2: Indicators for Alarm 1 and Alarm 2.
• Îkona sînyalê: Indicates successful DCF-77 signal reception.
• MIN / MAX: Indicators for minimum and maximum temperature records.

5.2. Sazkirina Alarman

The WS 6810 features two independent alarms (ALM1 and ALM2).

1. Press the "ALARM" button repeatedly to cycle through ALM1, ALM2, and normal time display.
2. When ALM1 or ALM2 is displayed, press and hold the "ALARM" button until the alarm time flashes.
3. Use the "+" or "-" buttons to adjust the hour, then press "ALARM" to confirm and move to minutes.
4. Use the "+" or "-" buttons to adjust the minutes, then press "ALARM" to confirm.
5. To activate/deactivate an alarm, select ALM1 or ALM2 display, then press the "+" button. An alarm icon will appear/disappear.

5.3. Fonksiyona Paşvexistinê

When an alarm sounds, press the "SNOOZE/LIGHT" button to activate the snooze function. The alarm will temporarily stop and sound again after approximately 5 minutes.

5.4. Guherandina Ronahiya Dîmenderê

Press the "SNOOZE/LIGHT" button (when no alarm is sounding) to toggle between the two available brightness levels for the LED display.

5.5. Viewing Min/Max Temperatures

Press the "MIN/MAX" button to cycle through the current, maximum, and minimum recorded indoor and outdoor temperatures. To reset the min/max records, press and hold the "MIN/MAX" button while the min/max values are displayed.

6. Maintenance

• Paqijî: Wipe the main unit and outdoor sensor with a soft, damp çît. Paqijkerên abrasive an solvanan bikar neynin.
• Guhertina Pîl: Replace batteries in the outdoor sensor and main unit (for backup) when the low battery indicator appears on the display or when performance degrades. Always replace all batteries of a set at the same time.
• Cihê Sensor: Periodically check the outdoor sensor's placement to ensure it is protected from direct sunlight and heavy precipitation for accurate readings and longevity.
• Embarkirinî: Ger amûrê ji bo demek dirêj hilînin, hemî pîlan derxînin da ku rê li ber rijandinê bigirin.

7. Destpêkirin

8. Specifications Teknîkî

9. Garantî û Piştgirî

Technoline products are manufactured to high quality standards. For warranty information, technical support, or service inquiries, please contact your retailer or visit the official Technoline website.

Official Product Page: http://www.technoline.eu/products/en/4029665068107

Ji kerema xwe ji bo îdîayên garantiyê delîla kirîna xwe biparêzin.