Westek 6043BC

Westek 6043BC Touch Pad Dimmer Instruction Manual

Model: 6043BC

Pêşkêş

The Westek 6043BC Touch Pad Dimmer is designed to convert any standard incandescent lamp into a touch-controlled dimmable lamp. This device allows you to easily adjust the light output with a simple touch, offering three levels of illumination. It is compatible with incandescent bulbs up to 200 Watts. This manual provides detailed instructions for safe installation, operation, and maintenance of your touch pad dimmer.

Taybetmendiyên Hilberê

  • Touch Light Control: Simply touch the pad to turn the light on or change the illumination level.
  • Ronahîya Birêkûpêk: Offers three distinct light settings, ranging from a low night light to full brightness.
  • Sêwirana hêsan: Works with incandescent bulbs up to 200 Watts, eliminating the need for specialized 3-way bulbs.
  • Şêweya Nûjen: Features a contemporary black finish and sleek design that complements various home decors.
  • Sazkirina hêsan: Designed for simple plug-in functionality to add dimmer capabilities to your existing table or floor lamps.

Agahiyên Ewlekariyê

Ji kerema xwe berî sazkirin û bikaranînê hemû rêwerzan bixwînin û fêm bikin. Vê rêbernameyê ji bo referansa pêşerojê biparêzin.

  • Tenê ji bo karanîna hundurîn.
  • Ji watê ya herî zêde derbas nekintage of 200 Watts for incandescent bulbs.
  • Piştrast bike ku lamp is unplugged from the wall outlet before installation.
  • Avoid using with LED or CFL bulbs unless specifically rated as dimmable and compatible with touch dimmers. Incompatible bulbs may flicker or be damaged.
  • Do not use this dimmer control with another dimmer in the same circuit.
  • Ji av û nemê dûr bixin.

Sazkirin û Sazkirin

Follow these steps to install your Westek 6043BC Touch Pad Dimmer:

  1. L. amade bikinamp: L-ya xwe piştrast bikinamp is unplugged from the wall outlet. Replace the existing light bulb with a standard incandescent bulb (up to 200 Watts).
  2. Connect the Dimmer: L-yê pêve bikinamp's power cord into the receptacle on the Westek 6043BC dimmer unit.
  3. Têkeve Outleta Dîwarê: Plug the dimmer unit into a standard wall outlet.
  4. Position the Touch Pad: Place the touch pad in a convenient location. The touch pad is designed to detect contact with any metallic conductive surface, which then controls the lamp. Ensure the touch pad wire is not pinched or damaged.
Back of Westek 6043BC packaging showing installation diagram

Figure 1: Installation diagram from product packaging. Shows how to connect the lamp to the dimmer and the dimmer to the wall outlet, along with the touch pad connection.

Westek 6043BC Touch Pad Dimmer main unit with plug

Figure 2: The main dimmer unit, which plugs into the wall and accepts the lamp's plug.

Westek 6043BC Touch Pad Dimmer touch pad

Figure 3: The circular touch pad component, which is used to control the lamp.

Telîmatên Operating

Once installed, operate the dimmer as follows:

  1. Turn On/Adjust Brightness: Lightly touch the metal touch pad. The lamp will cycle through three brightness levels: low, medium, and high.
  2. Temirandin: After the high brightness setting, touching the pad again will turn the lamp ji.
  3. Power Outage: Di bûyera hêzek outage, the dimmer may reset. Simply touch the pad to resume normal operation.

Lênerrînî

The Westek 6043BC Touch Pad Dimmer requires minimal maintenance. Ensure the unit and its connections are kept clean and dry. Do not attempt to open or repair the unit yourself, as this may void the warranty and pose a safety risk.

Çareserkirina pirsgirêkan

PirsegirêkSedema gengazÇare
Lamp does not turn on or dim.
  • Lamp not properly plugged into dimmer.
  • Dimmer not properly plugged into wall outlet.
  • Lamp's internal switch is off.
  • Incompatible bulb (LED/CFL).
  • ampûl xelet.
  • Hêz bikintage an şkênera devreyê vemirî.
  • Piştrast bike lamp cord is fully inserted into the dimmer.
  • Ensure dimmer is fully inserted into a working wall outlet.
  • L bizivirinamp's original switch to the ON position.
  • Replace with a standard incandescent bulb (up to 200W).
  • Lampê biguherînin.
  • Check your home's power supply and circuit breakers.
Lamp flickers or buzzes.
  • Incompatible bulb (LED/CFL).
  • Girêdana ampûlê sist e.
  • Replace with a standard incandescent bulb (up to 200W).
  • Ampûlê di qulika wê de hişk bikin.
Lamp turns on by itself occasionally.
  • Electrical interference (e.g., during thunderstorms, power fluctuations).
  • This can be normal behavior during electrical disturbances. Simply touch the pad to turn it off.

Specifications

  • Cins: 6043BC
  • Nîşan: Westek
  • Moda Operasyonê: ON-NONE-OFF (3-level dimming)
  • Maximum Wattage: 200 Watts (Incandescent bulbs only)
  • Voltage: 120V, 60Hz
  • Rêbaza Kontrolê: Pêbûn
  • Pîvanên Babetê (L x W x H): 3.9 x 1 x 7.9 inches
  • Giraniya Babetê: 3.8 Ons
  • Mal: Multi (Brass contact material)
  • Reng: Reş
  • Tenê karanîna hundurîn: Erê

Garantî û Piştgirî

The Westek 6043BC Touch Pad Dimmer comes with a limited warranty. For specific warranty details, please refer to the product packaging or contact Westek customer support. For technical assistance or further inquiries, please visit the official Westek webmalperê an bi beşa karûbarê xerîdar a wan re têkilî daynin.

Çêker: AmerTac

Balkeş bûn: 201.661.9945

Webmalper: www.amertac.com

© 2024 Westek. All rights reserved.

Ask a question about this manual

Ask about setup, troubleshooting, compatibility, parts, safety, or missing instructions. Manuals+ will review the question and use this page’s manual context to help answer it.